Publication

A. Journal papers-
A1. C.-Y. Su, W.-P. Shih, “Ultra-large suspended graphene as highly elastic membrane for capacitive pressure sensor,” accepted by Nanoscale, Jan. 11, 2016.
A2. J.-C. Li, C.-H. Weng, F.-C. Tsai, W.-P. Shih, and P.-Z. Chang, “Porous reduced-graphene-oxide membrane with enhanced gauge factor,” Applied Physics Letters, vol. 108, 013108, 2016.
A3. P.-J. Shih, H.-J. Cao, C.-J. Huang, I.-J. Wang, W.-P. Shih, and J.-Y. Yen, “A corneal elastic dynamic model derived from Scheimpflug imaging technology,” Ophthalmic and Physiological Optics, vol. 35, pp. 663-672, 2015.
A4. S.-C. Lin, C.-J. Hu, W.-P. Shih, and P.-C. Lin, “Model-based experimental development of passive compliant robot legs from fiberglass composites,” Applied Bionics and Biomechanics, Vol. 2015, 754832 (14 pages), 2015.
A5. C.-C. Chen, W.-P. Shih, P.-Z. Chang, H.-M. Lai, S.-Y. Chang, P.-C. Huang, and H.-A. Jeng, “Onion artificial muscles,” Applied Physics Letters, Vol. 106, 183702, 2015.
A6. Y.-Y. Chen, B.-A. Chen, D. Tsai, C.-C. Huang, J. Yu, W.-P. Shih, and C.-W. Lin, “An implantable probe with split anchor via residual stress and induced cell growth with gelatin nanofibers,” Micro & Nano Letters, Vol. 9, pp. 901-905, 2014.
A7. D. Liang, Z.-F. Lin, C.-C. Huang, and W.-P. Shih, “Tunable lens driven by dielectric elastomer actuator with ionic electrode,” Micro & Nano Letters, Vol. 9, pp. 869-873, 2014.
A8. A.Y. Wang, C.-C. Huang, Y.-C. Tsai, M.-D. Wu, D. Liang, P.-J. Shih, and W.-P. Shih, “Thermal manipulation utilizing micro-cantilever probe in scanning electron microscopy,” Lecture Motes in Electrical Engineering, Vol. 306, pp. 169-180, 2014.
A9. C.-L. Yeh, P.-C. Lai, W.-P. Shih, P.-S. Huang, and P.-L. Kuo, “Imaging monitored loosening of dense fibrous tissues using high-intensity pulsed ultrasound,” Physics in Medicine and Biology, Vol. 58, pp. 6779-6796, 2013.
A10. P.-C. Huang and W.-P. Shih, “Angular velocity response of nanoparticles dispersed in liquid crystal,” Applied Physics Letters, Vol. 102, 243510 (4 pages), 2013.
A11. T.-H. Lin, S.-F. Wen, B.-J. Chen, G.-H. Liu, and W.-P. Shih, “Humanoid eye robot with angle control and image registration for obstacle determination,” submitted to Journal of Bionic Engineering, July 18, 2013.
A12. C.-C. Huang, M.-D. Wu, D. Liang, J. Yu, P.-J. Shih, W.-P. Shih, “Fabrication and application of iron(III)-oxide nanoparticle/polydimethylsiloxane composite cone in microfluidic channels,” Journal of Nanomaterials, Vol. 2012, 986454 (10 pages), 2012.
A13. Y.-C. Tsai, P.-K. Chung, W.-P. Shih, and P.-C. Su, “Fabrication and strength analysis of humanoid focusing mechanism,” Microelectronic Engineering, Vol. 98, pp. 610-613, 2012.
A14. S.-C. Lin, W.-P. Shih, and P.-Z. Chang, “Microstructural dielectric elastomer actuator with uniaxial in-plan contraction,” Journal of Intelligent Material Systems and Structures, Vol. 24, pp. 347-356, 2012.
A15. L.-Y. Ding, W.-P. Shih, M.-H. Lin, Y.-C. Hu, and P.-Z. Chang, “An analytical model for instant design of an LCD cell with photospacers under gravity and local loading,” Journal of the Society for Information Display, Vol. 20, pp. 148-155, 2012.
A16. Y.-C. Tsai and W.-P. Shih, “Artificial petal effect on nanofibrillar parylene surface,” Journal of Adhesion, Vol. 88, pp. 32-54, 2012.
A17. M.-D. Wu, W.-P. Shih, Y.-C. Tsai, Y.-J. Chen, S.-H. Chang, and P.-Z. Chang, “Rapid dielectrophoresis assembly of a single carbon nanocoil on AFM tip apex,” IEEE Transactions on Nanotechnology, Vol. 11, pp. 328-335, 2012.
A18. T.-H. Lin, W.-P. Shih, and C.-S. Chen, “Surface wettability and contact angle analysis by dissipative particle dynamics,” Interaction and Multiscale Mechanics, Vol. 5, pp. 399-405, 2012.
A19. G.-W. Wu, S.-L. Chen, and W.-P. Shih, “Lamination and characterization of a polyethylene-terephthala flexible micro heat pipe,” Frontiers in Heat Pipes, Vol. 3, 023003 (5 pages), 2012.
A20. A.-B. Wang, I.-C. Lin, Y.-W. Hsieh, W.-P. Shih, and G.-W. Wu, “Effective pressure and bubble generation in a microfluidic T-junction,” Lab on a Chip, Vol. 11, pp. 3499-3507, 2011.
A21. W.-C. Wang, W.-J. Wu, W.-S. Hua, W.-P. Shih, and C.-L. Tsui, “Development of 2-D microdisplay using an integrated microresonating waveguide scanning system,” Journal of Intelligent Material Systems and Structures, Vol. 22, pp. 1613-1622, 2011.
A22. Y.-C. Wang, Y.-C. Tsai, and W.-P. Shih, “Flexible PDMS micro-lens array with programmable focus gradient fabricated by dielectrophoresis force,” Microelectronic Engineering, Vol. 88, pp. 2748-2750, 2011.
A23. Y.-C. Tsai, M.-D. Wu, and W.-P. Shih, “Fabrication and characterization of e-beam photoresist array for biomimetic self-cleaning dry adhesives,” Microelectronic Engineering, Vol. 88, pp. 2126-2128, 2011.
A24. T.-C. Hsu, C.-H. Lu, Y.-T. Huang, W.-P. Shih, and W.-S. Chen, “Concentric polymer-dispersed liquid crystal rings for light intensity modulation,” Sensors and Actuators A, Vol. 169, pp. 341-346, 2011.
A25. Y.-C. Tsai, M.-D. Wu, and W.-P. Shih, “A mask-free fabrication of SU-8/silicon spherical micro-probe,” Microelectronic Engineering, Vol. 88, pp. 2129-2131, 2011.
A26. C-.J. Chang, Y.-L. Yang, Y.-P. Lee, C.-J. Chiang, C.-A. Dai, J.-C. Chen, Y.-Y. Cheng, C.-C. Chen, W.-M. Liu, W.-P. Shih, and J.-Y. Yen, “Bionic soft crystalline lens materials for MEMs applications based on self-assembling amphiphilic block copolymer/nanoparticle hybrids,” Microelectronic Engineering, Vol. 88, pp. 1737-1741, 2011.
A27. C.-J. Chang, Y.-H. Lee, C.-A. Dai, C.-C. Hsiao, S.-H. Chen, N.P.D. Nurmalasari, J.-C. Chen, Y.-C. Cheng, W.-P. Shih, and P.-Z. Chang, “A large area biomaterial sheet of piezoelectric nanogenerators for energy harvesting: effect of RF sputtering on ZnO nanorod,” Microelectronic Engineering, Vol. 88, pp. 2236-2241, 2011.
A28. C.-J. Lee, M.-D. Wu, Y.-C. Tsai, and W.-P. Shih, “Fabrication and characteristics of an ultra-thin carbon nanotube/parylene membrane at large strain,” Microelectronic Engineering, Vol. 88, pp. 2394-2396, 2011.
A29. W.-P. Shih, C.-L. Lee, C.-W. Lee, L.-C. Tsao, Y.-J. Yang, and K.-C. Fan, “A comparison of polymer composites for development of flexible sensor array,” Journal of the Chinese Society of Mechanical Engineers, Vol. 32, pp. 267-272, 2011.
A30. C.-C. Yeh and W.-P. Shih, “Effects of water contents on the actuation performance of ionic polymer-metal composites,” Smart Materials and Structures, Vol. 19, 124007, 2010.
A31. G.-W. Wu, W.-P. Shih, C.-Y. Hui, S.-L. Chen, and C.-Y. Lee, “Bonding strength of pressurized microchannels fabricated by polydimethylsiloxane and silicon,” Journal of Micromechanics and Microengineering, Vol. 20, 115032, 2010.
A32. L.-Y. Ding, W.-P. Shih, Y.-C. Hu, Y.-J. Chena, and P.-Z. Chang, “CMOS-compatible electrochemical process for improving quality factor of spiral microinductors,” Micro & Nano Letters, Vol. 5, pp. 266-269, 2010.
A33. T.-E. Tsai, G.-W. Wu, C.-C. Chang, W.-P. Shih, and S.-L. Chen, ”Dynamic test method for determining the thermal performances of heat pipes,” International Journal of Heat and Mass Transfer, Vol. 53, pp. 4567-4578, 2010.
A34. C.-J. Chang, Y.-H. Lee, C.-J. Chiang, Y.-P. Lee, H.-C. Chien, W.-P. Shih, Y.-Y. Cheng, and C.-A. Dai, “Strength of polymer phase boundaries with large interfacial width: effects of interfacial profile and phase separation morphology,” Journal of Polymer Science B- Polymer Physics, Vol. 48, pp. 1834-1846, 2010.
A35. W.-P. Shih, L.-C. Tsao, M.-Y. Cheng, C. Chang, Y.-J. Yang, and K.-C. Fan, “Flexible temperature sensor array based on a graphite-polydimethlysiloxane composite,” Sensors, Vol. 10, pp. 3597-3610, 2010.
A36. D. Liang, W.-P. Shih, C.-S. Chen, and C.-A. Dai, “A miniature system for separating aerosol particles and measuring mass concentrations,” Sensors, Vol. 10, pp. 3641-3654, 2010.
A37. P.-J. Shih and W.-P. Shih, “Design, fabrication, and application of bio-implantable acoustic power transmission,” Journal of Microelectromechanical Systems, Vol. 19, pp. 494-502, 2010.
A38. C.-Y. Lee, C. Chang, W.-P. Shih, and C.-L. Dai, “Wet etching rates of InGaZnO for the fabrication of transparent thin-film transistors on plastic substrates,” Thin Solid Films, Vol. 518, pp. 3992-3998, 2010.
A39. Y.-J. Chen, W.-P. Shih, C.-K. Kao, and P.-Z. Chang, “Design and fabrication of a tunable superconductive resonator utilizing micromachined tunable capacitor,” Journal of Microelectromechanical Systems, Vol. 19, pp. 129-136, 2010.
A40. C.-W. Lee and W.-P. Shih, “Quantification of ion trapping effect of carbon nanomaterials in liquid crystals,” Materials Letters, Vol. 64, pp. 466-468, 2010.
A41. C.-Y. Lee, S.-J. Lee, Y.-C. Hu, W.-P. Shih, W.-Y. Fan, and C.-W. Chuang, “Real time monitoring of temperature of a micro proton exchange membrane fuel cell,” Sensors, Vol. 9, pp. 1423-1432, 2009.
A42. C.-Y. Lee, S.-J. Lee, Y.-C. Hu, W.-P. Shih, W.-Y. Fan, and C.-W. Chuang, “Integration of silicon micro-hole arrays as a gas diffusion layer in a micro fuel cell,“ International Journal of Hydrogen Energy, Vol. 34, pp. 6457-6464, 2009.
A43. W.-C. Chuang, Y.-C. Hu, C.-Y. Lee, W.-P. Shih, and P.-Z. Chang, “Electromechanical behavior of the curled cantilever beam,” Journal of Micro-Nanolithography, MEMS, and MOEMS, Vol. 8, No. 3, 033020, 2009.
A44. C.-A. Dai, C.-C. Hsiao, A.-C. Kao, C.-P. Liu, W.-B. Tsai, W.-S. Chen, W.-M. Liu, W.-P. Shih, and C.-C. Ma, “A membrane actuator based on an ionic polymer network and carbon nanotubes: the synergy of ionic transport and mechanical properties,” Smart Materials & Structures, Vol. 18, 085016, 2009.
A45. C.-A. Dai, A.-C. Kao, W.-B. Tsai, W.-S. Chen, W.-P. Shih, and C.-C. Ma, “Polymer actuator based on PVA/PAMPS ionic membrane: optimization of ionic transport properties,” Sensors and Actuators A, Vol. 155, pp. 152-162, 2009.
A46. W.-P. Shih, S.-Y. Chung, Y.-Y. Chen, W.-J. Wu, and P.-Z. Chang, “Tunable capacitor based on polymer-dispersed liquid crystal for power harvesting microsystems,” IEEE Transactions on Electron Devices, Vol. 55, pp. 2568-2573, 2008.
A47. X.-Y. Wang, C.-Y. Lee, Y.-C.Hu, W.-P. Shih, C.-C. Lee, J.-T. Huang, and P.-Z. Chang, “The fabrication of silicon-based PZT microstructures using aerosol deposition method,” Journal of Micromechanics and Microengineering, Vol. 18, 055034, 2008.
A48. Y.-J. Yang, M.-Y. Cheng, W.-Y. Chang, L.-C. Tsao, S.-A. Yang, W.-P. Shih, F.-Y. Chang, S.-H. Chang, and K.-C. Fan, “An integrated flexible temperature and tactile sensing array using PI-copper films,” Sensors and Actuators A, Vol. 143, pp. 143-153, 2008.
A49. T.-H. Lin and W.-P. Shih, “Automatic face authentication with self compensation,” Image and Vision Computing, Vol. 26, pp. 863-870, 2008.
A50. Y.-J. Yang, B.T. Chia, D.-R. Chang, H.-H. Liao, W.-P. Shih, F.-Y. Chang, and K.-C. Fan, “Development of a flexible temperature sensor array system,” Key Engineering Materials, Vol. 381-382, pp. 383-386, 2008.
A51. L.-C. Tsao, D.-R. Chang, W.-P. Shih, and K.-C. Fan, “Fabrication and characterization of electro-active polymer for flexible tactile sensing array,” Key Engineering Materials, Vol. 381-382, pp. 391-394, 2008.
A52. P.-J. Shih and W.-P. Shih, “Impact dynamics of vibratory micro-probe for micro coordinate measurement,” Journal of Applied Physics, Vol. 101, 113516, 2007.
A53. C.-H. Chu, W.-P. Shih, S.-Y. Chung, H.-C. Tsai, T.-K. Shing, and P.-Z. Chang, “A low actuation voltage electrostatic actuator for RF MEMS switch applications,” Journal of Micromechanics and Microengineering, Vol. 17, pp. 1649-1656, 2007.
A54. Y.-C. Hu, W.-P. Shih, and G.-D. Lee, “A method for mechanical characterization of capacitive devices at wafer-level via detecting the pull-in voltages of two test-bridges with different lengths,” Journal of Micromechanics and Microengineering, Vol. 17, pp. 1099-1106, 2007.
A55. L.-J. Yang, K.-C. Ke, C.-M. Wang, W.-P. Shih, and C.-L. Dai, “A circular microchannel integrated with embedded spiral electrodes used fluid transportation,“ Sensors and Actuators A, Vol. 139, pp. 172-177, 2007.
A56. Y.-C. Tsai, P.-J. Shih, T.-H. Lin, and W.-P. Shih, “Self-cleaning effects of biomimetic dry adhesives,” IEEE Review of Advances in Micro, Nano, and Molecular Systems, Vol. 1, pp. 631-632, 2006.
A57. T.-H. Lin, W.-P. Shih, C.-S. Chen, and Y.-T. Chiu, “Simulation and analysis of interfacial wettability by dissipative particle dynamics,” IEEE Review of Advances in Micro, Nano, and Molecular Systems, Vol. 1, pp. 265-566, 2006.
A58. P.-J. Shih, W.-P. Shih, T.-H. Lin, and H.-P. Huang, “Dynamic performance of micro coordinate measurement probe,” IEEE Review of Advances in Micro, Nano, and Molecular Systems, Vol. 1, pp. 477-478, 2006.
A59. W.-P. Shih, M. Pai, Y.-Y. Lin, C.-Y. Hui, and N.C. Tien, “Impact dynamics of micromachined bi-directional electro-thermal vibromotors,” Journal of Applied Physics, Vol. 96, No. 12, 7603, 2004.
A60. W.-P. Shih, C.-Y. Hui, and N.C. Tien, “Collapse of microchannels during anodic bonding: theory and experiments,” Journal of Applied Physics, Vol. 95, No. 5, 2800, 2004.
 
B. International Conference papers-
B1. J.-A. Chen, Y.-T. Lee, Y.-M. Chang, C.-H. Liu, and W.-P. Shih, “Stretchable spring electrodes for cylindrical dielectric elastomer actuator,” The 2nd International Conference on Control, Automation and Robotics (IEEE ICCAR 2016), Hong Kong, Apr. 28-30, 2016.
B2. P.-H. Lin, T.-K. Shen, Y.-R. Zeng, H.-C. Wu, L.-C. Wu, P.-C. Lin, and W.-P. Shih, “Designing synergistic walking of a humanoid single leg driven by pneumatic artificial muscles: an empirical study,” The 14th IFToMM World Congress, Taipei, Taiwan, Oct. 25-30, 2015.
B3. T.-K. Shen, P.-H. Lin, I.-F. Lee, C.-I. Lin, P.-C. Lin, and W.-P. Shih, “Implementation of a PID controller for a robotic leg actuated by pneumatic artificial muscles,” The 14th IFToMM World Congress, Taipei, Taiwan, Oct. 25-30, 2015.
B4. T.K. Chang, S.-T. Tsai, S.-H. Chang, F.-L. Yang, and W.-P. Shih, “Mechanical analysis and application of woodpecker pecking mechanism by bionics,” The 14th IFToMM World Congress, Taipei, Taiwan, Oct. 25-30, 2015.
B5. F.-C. Tsai, C.-H. Weng, C.-C. Chen, J.-C. Li, W.-P. Shih, and P.-Z. Chang, “Photonic-crystal-to-multilayer transformation for designing and measuring 3-D photonic crystal,” International Symposium on Optomechatronic Technologies, Seattle, W.A., U.S.A., Nov. 5-7, 2014.
B6. F.-C. Tsai, C.-H. Weng, C.-C. Chen, J.-C. Li, W.-P. Shih, Y.-C. Hu, and P.-Z. Chang, “Rapid fabrication and measurement for opal based photonic crystals,” “Wavelength-selective behavior of azobenzene-carrying polymer in interpenetrating polymer network,” The 2nd International Conference of Multi-Disciplines of Engineering on Advanced Technology and Environmentalism Design, Tainan, Taiwan, Oct. 31-Nov. 2, 2014.
B7. C.-H. Weng, F.-C. Tsai, C.-C. Chen, J.-C. Li, H.-W. Lee, W.-P. Shih, C.-A. Dai, Y.-C. Hu, and P.-Z. Chang, “Wavelength-selective behavior of azobenzene-carrying polymer in interpenetrating polymer network,” The 2nd International Conference of Multi-Disciplines of Engineering on Advanced Technology and Environmentalism Design, Tainan, Taiwan, Oct. 31-Nov. 2, 2014.
B8. C.-C. Chen, W.-P. Shih, Y.-C. Hu, and P.-Z. Chang, “Botanical epidermal cell tactile sensor,” The 2nd International Conference of Multi-Disciplines of Engineering on Advanced Technology and Environmentalism Design, Tainan, Taiwan, Oct. 31-Nov. 2, 2014.
B9. J.-C. Li, L.-Y. Ding, W.-P. Shih, Y.-C. Hu, and P.-Z. Chang, “Mechanical analysis for liquid crystal display cell under thermal effect,” The 2nd International Conference of Multi-Disciplines of Engineering on Advanced Technology and Environmentalism Design, Tainan, Taiwan, Oct. 31-Nov. 2, 2014.
B10. C.-C. Huang, C.-Y. Su, Y.-M. Chen, and W.-P. Shih, “Tropnin-I aptamer sensor based on back-gated graphene transistor,” The 6th International Conference on Recent Progress in Graphene Research, Taipei, Taiwan, Sep. 21-25, 2014.
B11. P.-J. Shih, Y.-R. Guo, W.-P. Shih, and C.-L. Dai, “A mathematical model for the oscillation of the eyeball,” International Research Conference on Engineering and Technology (IRCET), Bali, Indonesia, June 27-29, 2014.
B12. T.-H. Lin, C.-Y. Yang, and W.-P. Shih, “Obstacle detection system using line-laser,” 3D Systems and Applications (3DSA Korea), Seoul, Korea, May 28-30, 2014.
B13. Y.-Y. Chen, B.-A. Chen, D. Tsai, C.-C. Huang, W.-P. Shih, and C.-W. Lin, “An implantable probe with split anchors via residual stress and induced cell growth with gelatin nanofibers,” The 7th Asia-Pacific Conference on Transducers and Micro/Nano Technologies (APCOT), Daegu, Korea, Jun. 29-Jul. 2, 2014.
B14. D. Liang, Z.-F. Lin, C.-C. Huang, and W.-P. Shih, “Tunable lens driven by dielectric elastomer actuator with ionic electrode,” The 7th Asia-Pacific Conference on Transducers and Micro/Nano Technologies (APCOT), Daegu, Korea, Jun. 29-Jul. 2, 2014.
B15. J.-R. Qiu, Z.-S. Lin, Y.-L. Chang, P.-C. Lin, W.-L. Hsu, and W.-P. Shih, “Evaluation of power-to-weight ratio of one-legged model utilizing pneumatic artificial muscles,” The 7th World Congress of Biomechanics (WCB 2014), Boston, U.S.A., Jul. 6-11, 2014.
B16. Y.-L. Chang, H.-Y. Lin, Z.-S. Lin, J.-R. Qiu, W.-L. Hsu, and W.-P. Shih, “The simplest passive walking model for simulating falls related to friction force,” The 7th World Congress of Biomechanics (WCB 2014), Boston, U.S.A., Jul. 6-11, 2014.
B17. Y.-H. Wang, D. Tsai, B.-A. Chen, Y.-Y. Chen, C.-C. Huang, P.-C. Huang, C.-Y. Lin, J. Yu, W.-P. Shih, C.-W. Lin, and H.-J. Sheen, “Micro-wing and pore design in an implantable FPC-based neural stimulation probe for minimally invasive surgery,” The 27th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2014), San Francisco, U.S.A., Jan. 26-30, 2014.
B18. Y.-L. Change, H.-Y. Lin, C.-J. Chiu, Z.-S. Lin, and W.-P. Shih, “Using a simple passive walking model to analyze friction force and slip boundary,” The 12th International Conference on Automation Technology, Tainan, Taiwan, Nov. 1-3, 2013.
B19. A.T. Wang, C.-C. Huang, Y.-C. Tsai, M.-D. Wu, D. Liang, and W.-P. Shih, “Thermal manipulation utilizing micro-cantilever probe in scanning electron microscopy,” International Symposium on Optomechatronic Technologies, Jeju Island, Korea, Oct. 28-30, 2013 (EI).
B20. C.-C. Chen, W.-P. Shih, and P.-Z. Chang, “Flexible tactile sensor with high sensitivity utilizing botanical epidermal cell natural micro-structures,” IEEE Sensors, Taipei Taiwan, Oct. 28-31, 2012.
B21. C.-H. Weng, Y.-J. Wang, W.-P. Shih, C.-A. Dai, and P.-Z. Chang, “Wavelength-selective optomechanical sensor based on interpenetrating polymer network,” IEEE Sensors, Taipei Taiwan, Oct. 28-31, 2012.
B22. C.-C. Chen, W.-P. Shih, and P.-Z. Chang, “Electromechanical behavior of botanical epidermal cell microstructures with electrostatic actuation,” The 23rd International Conference on Adaptive Structures and Technologies, Nanjing, China, Oct. 11-13, 2012.
B23. C.-H. Weng, Y.-J. Wang, W.-P. Shih, C.-A. Dai, and P.-Z. Chang, “Non-catalyst interpenetrating polymer network actuator induced by UV/green light,” The 23rd International Conference on Adaptive Structures and Technologies, Nanjing, China, Oct. 11-13, 2012.
B24. M.-D. Wu, C.-C. Huang, and W.-P. Shih, “Electrothermal characteristic of single carbon nanocoil,” The 2nd International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, Xian, China, Aug. 29-Sep. 1, 2012.
B25. S. Soulimane, W.-P. Shih, M. Vedrenne, and H. Camon, “Ceramic siloxane composite as a future elastomer dielectric for micro-actuator realization,” The ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2012), Stone Mountain, Georgia, USA, Sep. 19-21, 2012.
B26. G.-W. Wu, W.-P. Shih, and S.-L. Chen, “A high dissipation performance polyethylene-terephthalate heat pipe,” The 16th International Heat Pipe Conference, Lyon, France, May 20-24, 2012.
B27. J.-C. Li. L.-Y. Ding, W.-P. Shih, M.-H. Lin, Y.-C. Hu, and P.-Z. Chang, “Analysis of gravity mura under thermal expansion of LCD cells,” Society for Information Display’s Display Week (SID 2012), Boston, MA, USA, Jun. 3-8, 2012.
B28. B.-J. Chen, S.-F. Wen, G.-H. Liu, Y.-Y. Lee, and W.-P. Shih, “Humanoid eye robot with angle control and image registration,” IEEE International Conference on Robotics and Biomimetics (IEEE-ROBIO 2011), Phuket Island, Tailand, Dec. 7-11, 2011.
B29. L.-Y. Ding, W.-P. Shih, M.-H. Lin, Y.-C. Hu, and P.-Z. Chang, “Mechanical model for liquid crystal cell associated with gravity mura,” The 18th International Display Workshops, Nagoya, Japan, Dec. 7-9, 2011.
B30. S.-F. Wen, B.-J. Chen, G.-H. Liu, Y.-Y. Lee, and W.-P. Shih, “Design and fabrication of artificial eye for the development of a humanoid robot,” The 11th International Conference on Automation Technology, Douliu, Taiwan, Nov. 18-20, 2011.
B31. S.-C. Lin, W.-P. Shih, and P.-Z. Chang, “Microstructural dielectric elastomer actuator with negative Poisson’s ratio,” The 22nd International Conference on Adaptive Structures and Technologies, Corfu, Greece, October 10-12, 2011.
B32. S. Soulimane, S. Pinon, W.-P. Shih, and H. Camon, “Dielectric elastomer micro actuator made in micromachining technology: finite element modeling and deformation measurement,” Eurosensors XXV, Athens, Greece, Sep. 4-7, 2011.
B33. S.-L. Yu, L.-Y. Ding, W.-P. Shih, and P.-Z. Chang, “Fabrication and characterization of porous material composite for humidity sensing,” The 8th International Conference on Networked Sensing Systems, Penghu, Taiwan, Jun. 12-15, 2011.
B34. D. Liang, D.-R. Chang, and W.-P. Shih, “Integration investigation of wireless sensor network for heating, ventilating, and air conditioning,” The 8th International Conference on Networked Sensing Systems, Penghu, Taiwan, Jun. 12-15, 2011.
B35. I.-C. Lin, Y.-W. Hsieh, A.-B. Wang, G.-W. Wu and W.-P. Shih, “The theoretical and experimental investigations of operation window of controllable bubble generation for “Air-Bubble Coating”,” The 3rd Asian Coating Workshop, Fukuda, Japan, Jul. 4-5, 2011.
B36. Y.-W. Hsieh, I.-C. Lin, A.-B. Wang, G.-W. Wu and W.-P. Shih, “Investigation of controllable heat-triggered micro-bubble generation in a double-channel design for “Air-Bubble Coating”,” The 3rd Asian Coating Workshop, Fukuda, Japan, Jul. 4-5, 2011.
B37. Y.-C. Wang, Y.-C. Tsai, and W.-P. Shih, “Dielectrophoresis formation of ellipsoidal PDMS micro-lens array diagonally aligned on flexible membrane,” Solid State Sensors, Actuators and Microsystems (TRANSDUCERS), Beijing, China, Jun. 5-9, 2011.
B38. C.-C. Huang, M.-D. Wu, C.-D. Chang, Y.-C. Wang, and W.-P. Shih, “Fabrication and application of iron-oxide nanoparticle/PDMS cone in lab on a chip,” Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS (DTIP 2011), Aix-en-Provence, France, May 11-13, 2011.
B39. L.-Y. Ding, W.-P. Shih, M.-H. Lin, Y.-C. Hu, and P.-Z. Chang, “Instant design criteria for LCD cell with photospacer under gravity and local loading using Winkler model,” Society for Information Display’s Display Week (SID 2011), Loa Angeles, USA, May 15-20, 2011 (Distinguished Paper Award).
B40. G.-H. Liu, S.-F. Wen, B.-J. Chen, and W.-P. Shih, “Real-time humanoid visual system with five degrees of freedom,” 2011 World Congress on Intelligent Control and Automation (WCICA 2011), Taipei, Taiwan, Jun. 21-25, 2011.
B41. G.-W. Wu, W.-P. Shih, and S.-L. Chen, “Lamination and characterization of a PET flexible micro heat pipe,” The 10th International Heat Pipe Symposium, Taipei, Taiwan, Nov. 6-9, 2011.
B42. C.-T. Wu, L. Ding, Y.-C. Tsai, W.-T. Lin, T.-C. Chen, W.-P. Shih, and C.-W. Lin, “An implantable bipolar spin stimulating probe with bio-inspired adhesive microtubes,” 24th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2011), Cancun, Mexico, Jan. 23-27, 2011.
B43. Y.-C. Wang and W.-P. Shih, “Analysis of U-shape electrothermal microactuators,” The First IFToMM Asian Conference on Mechanism and Machine Science (Asian-MMS 2010), October 21-25, 2010, Taipei, Taiwan.
B44. W.-C. Chuang, H.-L. Lee, Y.-C. Hu, W.-P. Shih, and P.-Z. Chang, “Electromechanical coupling of CMOS-MEMS testkey for extracting material properties,” The First IFToMM Asian Conference on Mechanism and Machine Science (Asian-MMS 2010), October 21-25, 2010, Taipei, Taiwan.
B45. T.-C. Hsu, C.-H. Lu, Y.-T. Huang, W.-P. Shih, and W.-S. Chen, “An artificial iris for light intensity modulation of humanoid robot vision,” The SICE Annual Conference (SICE 2010), Aug. 18-21, 2010, Taipei, Taiwan.
B46. H.-Y. Lin, D.-H. Chen, S.-Y. Liu, P.-K. Chung, W.-P. Shih, and L.-J. Yang, “Fabrication and characterization of a miniature self-sensing joint of carbon nanotube bundles,” The 10th International Symposium on Measurement and Quality Control (ISMQC 2010), Sep. 5-9, Osaka, Japan.
B47. I.-C. Lin, A.-B. Wang, G.-W. Wu, and W.-P. Shih, “Multichannel development for the air-bubble coating,” The 15th International Coating Science and Technology Symposium, St. Paul, MN, U.S.A., Sep. 12-15, 2010.
48. W.-C. Chung, Y.-C. Hu, C.-W. Lin, W.-P. Shih, and P.-Z. Chang, “An analytical model for optimizing LCD-cell design,” The 12th International Congress on Mesomechanics, Taipei, Taiwan, Jun. 21-25, 2010.
B49. Y.-S. Chi, W.-P. Shih, C.-S. Chen, and P.-L. Liu, “How to realize open innovation through disconnected network structure and structural holes- the empirical study of INSIGHT center,” The XXIISPIM Conference, International Society for Professional Innovation Management, Bilbao, Spain, Jun. 6-9, 2010.
B50. Y.-T. Huang, T.-C. Hsu, C.-H. Lu, C.-W. Lin, W.-P. Shih, W.-S. Chen, and P.-Z. Chang, “Concentric polymer-dispersed liquid crystal rings for light intensity modulation,” The 5th Asia-Pacific Conference on Transducers and Micro-Nano Technology, Perth, Western Australia, Jul. 6-9, 2010.
B51. H.-Y. Hung, D.-R. Chang, and W.-P. Shih, “Design and simulation of a CMOS-MEMS gyroscope with a low-noise sensing circuit,” IEEE 2010 International Symposium on Computer, Communication, Control and Automation, Tainan, Taiwan, May 5-7, 2010. (EI)
B52. C.-W. Lin, H.-W. Chiu, M.-L. Lin, C.-H. Chang, I.-H. Ho, P. Fang, Y. Li, C. Wang, Y.-C. Tsai, Y.-R. Wen, W.-P. Shih, Y.-J. Yang, and S.-S. Lu, “Pain control on demand based on pulsed radio-frequency stimulation of the dorsal root ganglion using a battery less implantable CMOS SoC,” International Solid-State Circuits Conference (ISSCC), San Francisco, CA, USA, Feb. 7-11, 2010.
B53. K.-F. Chang, Y.-C. Tsai, W.-P. Shih, and L.-J. Yang, “An electro-active nano-valve array for reusable drug delivery system,” 23th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2010), Hong Kong, Jan. 24-28, 20010.
B54. C.-W. Lin, Y.-J. Chen, C.-W. Lee, W.-P. Shih, and P.-Z. Chang, “High tuning range and low pull-in voltage micromachined tunable capacitor filled with liquid crystal,” (Oral presentation) 23th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2010), Hong Kong, Jan. 24-28, 2010.
B55. K.-F. Chang, W.-P. Shih, and C.-S. Chen, “Fabrication of polymeric nano-valve array for biomedical applications,” ASME 2010 First Global Congress on NanoEngineering for Medicine and Biology (NEMB2010), Houston, Texas, USA, February 7-10, 2010.
B56. Y.-C. Tsai, W.-P. Shih, M.-L. Lin, C.-H. Chang, W.-T. Lin, H.-W. Chiu, Y.-R. Wen, S.-S. Lu, and C.-W. Lin, “Fabrication and verification of an implantable electrical stimulation system,” The International Conference on Mechatronic System of Integration and Application, Tainan, Taiwan, Dec. 4-5, 2009.
B57. K.-F. Chang, Y.-C. Tsai, and W.-P. Shih, “A controllable drug delivery system by electro-active polymer,” The International Conference on Mechatronic System of Integration and Application, Tainan, Taiwan, Dec. 4-5, 2009.
B58. G.-H. Liu, C.-P. Hung, C.-H. Lin, and W.-P. Shih, “Real-time humanoid visual system with five degrees of freedom,” The International Conference on Mechatronic System of Integration and Application, Tainan, Taiwan, Dec. 4-5, 2009.
B59. C.-C. Yeh, W.-P. Shih, H. Camon, A. Boukabache, and C.-C. Ma, “Effect of water content on the actuation performance of ionic polymer metal composites,” The 20th International Conference on Adaptive Structures and Technologies, Hong Kong, October 20-22, 2009.
B60. P.-L. Liao, Y.-C. Hu, W.-P. Shih, X.-Y. Wang, and P.-Z. Chang, “Study on the acoustic impedance matching of human tissues for power transmission/charging system of implanted biochip,” IEEE International Conference on Nano/Molecular Medicine and Engineering, Tainan, Taiwan, October 18-21, 2009.
B61. M.-D. Wu, Y.-C. Tsai, Y.-J. Chen, W.-P. Shih, S.-H. Chang, P.-Z. Chang, J.-T. Huang, and L.-J. Yang, “Rapid dielectrophoresis assembly of single carbon nanocoil on an AFM probe tip,” The 15th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2009), Denver, CO, USA, June 21-25, 2009 (Oral presentation).
B62. L.-Y. Ding, T. Wang, Y.-C. Hu, W.-P. Shih, S.-S. Lu, and P.-Z. Chang, “CMOS-Compatible electrochemical process for RF CMOS inductors,” The 15th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2009), Denver, CO, USA, June 21-25, 2009.
B63. T.-S. Chen, Y.-K. Yen, W.-P. Shih, and L.-S. Huang, “Blood separation filter integrated with micro-cantilever biosensor on a microchannel chip,” The 10th International Conference on Automation Technology, Tainan, Taiwan, June 27-29, 2009.
B64. Y.-C. Tsai, N.-F. Chiu, P.-C. Liu, Y.-C. Ou, H.-H. Liao, Y.-J. Yang, L.-J. Yang, U. Lei, F.-S. Chao, S.-S. Lu, C.-W. Lin, and W.-P. Shih, “Fabrication process of integrated multi-analyte biochip system for implantable applications,” 22th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2009), Sorrento, Italy, Jan. 25-29, 2009.
B65. L.-J. Leu, C.-C. Chen, A.-B. Wang, C.S. Chen, W.-A. Wang, W.-P. Shih, B.-S. Chiou, J.-S. Tang, C.-W. Lin, D. Liang, and C.-F. Lee, “Smart ventilation for superior living environment,” The Twenty-First KKCNN symposium on Civil Engineering, Singapore, Oct. 27-28, 2008.
B66. C.-L. Lee, W.-P. Shih, and S.-L. Chen, “Characterization of PDMS/nylon composites as capillary layer in flexible micro heat pipe,” 9th International Heat Pipe Symposium, Kuala Lumpur, Malaysia, Nov. 17-20, 2008.
B67. C.-W. Lee, C.-L. Lee, L.-C. Tsao, W.-P. Shih, and K.-C. Fan, “A comparison of polymer composites for development of flexible sensor array,” The 4th International Symposium on Precision Mechanical Measurements (ISPMM’2008), Hefei, Anhui, China, Aug. 25-29, 2008.
B68. T.-W. Huang, J.-M. Wang, W.-P. Shih, and L.-J. Yang, “Flexible tunable lens and pupil actuated by concentration-responsive hydrogel,” The 4th Asia-Pacific Conference on Transducers and Micro-Nano Technology (APCOT 2008), Tainan, Taiwan, Jun. 22-25, 2008.
B69. I.-L. Chen, Y.-C. Tsai, C.-L. Lee, W.-P. Shih, and S.-L. Chen, “Flexible micro heat pipes fabricated by utilizing dicing saw,” The 4th Asia-Pacific Conference on Transducers and Micro-Nano Technology (APCOT 2008), Tainan, Taiwan, Jun. 22-25, 2008.
B70. L.-Y. Liao, W.-P. Shih, and C.-S. Chen, “Determination of colloid interactions due to interfacial tension,” The 4th Asia-Pacific Conference on Transducers and Micro-Nano Technology (APCOT 2008), Tainan, Taiwan, Jun. 22-25, 2008.
B71. C.-L. Lee, Y.-W. Chang, W.-P. Shih, and S.-L. Chen, “Fabrication and characterization of hydrophilic porous polymeric composites of PDMS and nylon for flexible micro heat pipe,” The 4th Asia-Pacific Conference on Transducers and Micro-Nano Technology (APCOT 2008), Tainan, Taiwan, Jun. 22-25, 2008.
B72. D. Liang, C.-S. Chen, and W.-P. Shih, “Micro particle sensor with QCM and virtual impactor for measuring mass concentration and size distribution,” The 4th Asia-Pacific Conference on Transducers and Micro-Nano Technology (APCOT 2008), Tainan, Taiwan, Jun. 22-25, 2008.
B73. M.-D. Wu, Y.-C. Tsai, P.-J. Shih, and W.-P. Shih, “Phase separation of SU-8 microspheres with interfacial tension enhanced by low temperature stirring,” The 4th Asia-Pacific Conference on Transducers and Micro-Nano Technology (APCOT 2008), Tainan, Taiwan, Jun. 22-25, 2008.
B74. C.-C. Yeh, D.-R. Chang, C.-C. Lee, P.-J. Shih, W.-P. Shih, and C.-C. Ma, “Self-sensing bilayer artificial sphincter for resolving urinary incontinence,” The 4th Asia-Pacific Conference on Transducers and Micro-Nano Technology (APCOT 2008), Tainan, Taiwan, Jun. 22-25, 2008.
B75. Y.-J. Chen, C.-K. Kao, W.-P. Shih, S.-Y. Chung, and P.-Z. Chang, “Flip-chip bonded MEMS capacitor applied on tuning superconductive resonator,” 21th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2008), Tucson, Arizona, USA, Jan. 13-17, 2008.
B76. S.-L. Yu, D.-R. Chang, L.-C. Tsao, W.-P. Shih, and P.-Z. Chang, “Porous nylon with electro-active dopants as flexible sensors and actuators,” 21th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2008), Tucson, Arizona, USA, Jan. 13-17, 2008.
B77. B.-S. Lee, W.-J. Wu, W.-P. Shih, D. Vasic, and F. Costa, “Power harvesting using piezoelectric MEMS generator with interdigital electrodes,” 2007 IEEE International Ultrasonics Symposium, New York, Oct. 28-31, 2007.
B78. B.T. Chia, D.-R. Chang, H.-H. Liao, Y.-J. Yang, W.-P. Shih, F.-Y. Chang, and K.-C. Fan, “Development of a flexible temperature sensor array,” 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2007), Sendai, Japan, Sep. 25-27, 2007.
B79. M.-Y. Cheng, W.-Y. Chang, L.-C. Tsao, S.-A. Yang, Y.-J. Yang, W.-P. Shih, F.-Y. Chang, S.-H. Chang, and K.-C. Fan, “A large area temperature and tactile sensing array,” 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2007), Sendai, Japan, Sep. 25-27, 2007.
B80. L.-C. Tsao, D.-R. Chang, W.-P. Shih, and K.-C. Fan, “Fabrication and characterization of electro-active polymer for flexible tactile sensing array,” 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2007), Sendai, Japan, Sep. 25-27, 2007.
B81. S.-Y. Chung, Y.-Y. Chen, W.-J. Wu, W.-P. Shih, and P.-Z. Chang, “Tunable capacitor based on polymer-dispersed liquid crystal for optimum micro-power harvesting,“ The 14th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2007), Lyon, France, June 10-14, 2007.
B82. L.-C. Tsao, M.-Y. Cheng, I.-L. Chen, W.-P. Shih, Y.-J. Yang, F.-Y. Chang, K.-C. Fan, and S.-H. Chang, “Flexible temperature sensor array using electro-resistive polymer for humanoid artificial skin,” The 14th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2007), Lyon, France, June 10-14, 2007.
B83. Y.-C. Tsai, D.-R. Chang, L.-C. Tsao, M.-D. Wu, P.-J. Shih, and W.-P. Shih, “Self-aligned stylus with high sphericity for micro coordinate measurement,” The 14th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2007), Lyon, France, June 10-14, 2007.
B84. B.T. Chia, D.-R. Chang, H.-H. Liao, Y.-J. Yang, W.-P. Shih, F.-Y. Chang, and K.-C. Fan, “Temperature sensor array using flexible substrate,” 20th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2007), pp. 589-592, Kobe, Japan, Jan. 21-25, 2007.
B85. M.-Y. Cheng, W.-Y. Chang, L.-C. Tsao, S.-A. Yang, Y.-J. Yang, W.-P. Shih, F.-Y. Chang, and K.-C. Fan, “Design and fabrication of an artificial skin using PI-copper films,” 20th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2007), pp. 389-392, Kobe, Japan, Jan. 21-25, 2007.
B86. P.-J. Shih, W.-P. Weng, W.-P. Shih, Y.-C. Tsai, and P.-Z. Chang, “Acoustic polarization for optimized implantable power transmission,” 20th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2007), pp. 879-882, Kobe, Japan, Jan. 21-25, 2007.
B87. B. Lee, P.-J. Shih, J.-J. He, W.-P. Shih, and W.-J. Wu, “A study of implantable power haversting transducers,” SPIE Proc. Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, 6530-17, San Diego, California, 2007.
B88. C.-H. Cheng, F.-Y. Chang, L.-C. Tsao, W.-P. Shih, S.-H. Chang, and K.-C. Fan, “Characterization of pressure sensitive rubber for artificial skin of robotics,” International Manufacturing Leaders Forum (IMLF 2006), Taipei, Taiwan, Oct. 23-25, 2006.
B89. M.-Y. Cheng, W.-Y. Chang, L.-C. Tsao, S.-A. Yang, Y.-J. Yang, W.-P. Shih, F.-Y. Chang, and K.-C. Fan, “Integrated temperature and tactile sensing arrays on a flexible substrate,” International Manufacturing Leaders Forum (IMLF 2006), Taipei, Taiwan, Oct. 23-25, 2006.
B90. B.-S. Lee, J.-J. He, W.-J. Wu, and W.-P. Shih, “MEMS power receiver using piezoelectric cantilever beams and interdigitated electrodes,” Proc. IEEE International Conference on Systems, Man, and Cybernetics, Taipei, Taiwan, Oct. 8-11, 2006.
B91. T.-H. Lin, W.-C. Chen, W.-Y. Ho, and W.-P. Shih, “3D face authentication by mutual coupled 3D and 2D feature extraction,” Proc. ACM Southeast Conference’06, Melbourne, Florida, Mar. 10-12, pp. 423-427, 2006.
B90. B.-S. Lee, J.-J. He, W.-J. Wu, and W.-P. Shih, “MEMS generator for power harvesting by vibrations using piezoelectric cantilever beam with digitate electrode,” Proc. SPIE Smart Structures and Materials, 6169-11, San Diego, Feb. 26- Mar. 2, 2006 (EI).
B91. Y.-C. Tsai, P.-J. Shih, T.-H. Lin, and W.-P. Shih, “Self-cleaning effects of biomimetic dry adhesives,” 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS 2006), pp. 1388-1391, Zhuhai, China, Jan. 18-21, 2006.
B92. T.-H. Lin, W.-P. Shih, C.-S. Chen, and Y.-T. Chiu, “Simulation and analysis of interfacial wettability by dissipative particle dynamics,” Proc. of 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS 2006), pp. 571-574, Zhuhai, China, Jan. 18-21, 2006 (EI).
B93. P.-J. Shih, W.-P. Shih, T.-H. Lin, C.-T. Liu, S.-H. Jen, X.-Y. Wang, and H.-P. Huang, “Dynamic performance of micro coordinate measurement probe,” Proc. of 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS 2006), pp. 1047-1051, Zhuhai, China, Jan. 18-21, 2006 (EI).
B94. Y.-C. Tsai, P.-J. Shih, W.-P. Shih, and L.-S. Huang, “E-beam photoresist and carbon nanotubes as biomimetic dry adhesives,” 19th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2006), Istanbul, Turkey, Jan. 22-26, 2006.
B95. K. Gu, C.-L. Chang, J.-C. Shieh, and W.-P. Shih, “Design and fabrication of phononic crystals in surface acoustic micro devices,” 19th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2006), pp. 686-689, Istanbul, Turkey, Jan. 22-26, 2006.
B96. T.-S. Chen, C.-P. Chen, Y.-C. Tsai, W.-P. Shih, and W.-C. Lin, “A 3D biological filtration matrix using self-assembled microspheres inside microchannels and gelatin sacrificial layer,“ 19th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2006), pp. 506-509, Istanbul, Turkey, Jan. 22-26, 2006.
B97. B.-S. Lee, S.-W. Lin, W.-J. Wu, and W.-P. Shih, “Power harvesting from vibrations using a piezoelectric MEMS generator,“ 16th Proc. International Conference on Adaptive Structures and Technologies, Oct. 10-12, Paris, France, pp. 391-400, 2005.
B98. L.-J. Yang, K.-C. Liu, K.-C. Jo, and W.-P. Shih, “Buckled-type valves integrated by parylene micro-tubes,” Transducers’05, Seoul, Korea, 2005.
B99. K. Gu, J.-C. Shieh, and W.-P. Shih, “Design and fabrication of 2D phononic crystals in surface acoustic wave micro devices,” International Symposium on Nano Science and Technology, Tainan, Taiwan, Nov. 10-11, 2005.
B100. B.L. Chua, Z. Li, D.T. McCormick, W.-P. Shih, and N.C. Tien, “A unipolar corona discharge microfabricated ionizer structure for gases at atmospheric pressure and composition,” 17th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2004), Maastricht, The Netherlands, Jan25-29, 2004.
B101. W.-P. Shih, Z. Li, D.T. McCormick, N.C. Tien, and C.-Y. Hui, “Tunable Solenoid Microinductors utilizing permalloy electro-thermal vibromotors,” 17th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2004), Maastricht, The Netherlands, Jan25-29, 2004.
B102. W.-P. Shih, M. Pai, Y.-Y. Lin, C.-Y. Hui, and N.C. Tien, “Modeling and characterization of micromachined bi-directional electro-thermal vibromotors,” Proceedings of ASME International Mechanical Engineering Congress and R&D Exposition, Nov. 15-21, 2003.
B103. C.-Y. Hui and W.-P. Shih, “Stability of micro-channels fabricated using anodic bonding,” Proceedings of the 25th Annual Meeting of the Adhesion Society, pp.414-416, 2002.

%d 位部落客按了讚: